Fulgor Milano FCLH 9008 ID WT Installación Uso Y Mantenimiento página 35

The active timer can also be adjusted or stopped by selecting
the cooking zone and re-entering the timer menu. After the
counter has expired, audible feedback and visual feedback
(flashing "00:00:00") is provided. The acoustic feedback ends
after 2 min. or by touching a random key.
Pause and Call up function
Activating the Pause function:
When at least one cooking zone is in operation, the pause
function can be activated. To activate the pause function, press
the "||" symbol on the display.
The pause condition can also be activated with cooking zone
specific errors - here the error display is hidden. The indication
of residual heat and special messages are also hidden; the
pause display has priority.
While the Pause function is active:
While the pause function is active, no power will be supplied
to any cooking zone. All system states will be maintained
throughout the pause. After the pause, the timeout counters
will be restarted for the cooking zones without pans detected
(max. 10 min). Any timers (including the egg timer) set before
the pause will be interrupted during the pause and continue
upon exiting pause mode.
When the pause mode is activated, a selected booster or
automatic boil function is ended.
The residual heat calculation and the maximum operating time
limitations will not be interrupted and will continue to run in the
background.
Pause mode can only be activated for a maximum of 10 min.
If the pause mode is not deactivated within 10 min, the hob
switches off automatically. During the pause time it is possible
to use the on/off button to turn off the control. In this case, the
pause mode is also deactivated.
Deactivating the pause mode:
To deactivate the pause mode, press the position indicated on
the slider. This will reactivate the state prior to activation of the
pause.
Call up function:
If the control has been accidentally turned off via the main
switch, all the settings can be restored using the call up function.
After turning off the control from the main switch, the user has
6 seconds to turn the control back on and then the settings will
be reset automatically. The call up function can only be used if
at least one cooking zone was active (cooking level> 0).
Settings restored:
• Cooking levels of all the cooking zones.
• Minutes and Seconds of the timers relating to the active
cooking zone.
• Automatic heating time and booster function.
• Child lock state.
Time lock 20 seconds
To activate the time lock function, it is necessary to briefly press
the 20 sec button.
While the time lock is active, the following message is displayed
and the remaining time is counted down.
General hob settings
The user can adjust the general settings of the hob. These
settings persist even after the hob is switched off.
It is possible to adjust the following settings:
• Language selection
• Display brightness
• Volume control
To access the settings menu, press the button on the right.
EN
13