Kohler K-2440 Manual Del Usuario página 5

1
8-3/4"
(22.2 cm)
Measure and
mark the hanger
location.
3
8-3/4"
(22.2 cm)
Mark and drill
the fastener
locations.
3. Mount the Hanger
Install the vanity and lavatory according to the manufacturer's
instructions.
Using a pencil, mark the wall at the centerpoint of the vanity at
the rim of the lavatory.
From the marked point, mark 8-3/4" (22.2 cm) above the rim of
the lavatory. (1)
Center the bottom of the hanger at the pencil mark, then level the
hanger. (2)
NOTE: Use a minimum of three fasteners, spacing them as far apart
as possible.
Mark the mounting hole locations of the hanger, then confirm the
marks are level. (3)
Drill the holes at the marked mounting hole locations.
Secure the hanger to the wall with fasteners. (4)
Kohler Co.
2
Level the
hanger.
4
Secure the
fasteners.
5 1059558-2-A