Toro TR70XT Serie Manual De Instrucciones página 2

Changing Nozzle
The TR70XT sprinkler comes with
seven additional nozzle sizes from
7 to 27 GPM (31.8 to 122.7 LPM).
To change the nozzle, insert the
blade end of the sprinkler tool or a
screwdriver through the cap. Turn
the nozzle screw out until it clears
the nozzle. Pry the nozzle out at the
bottom and install the new nozzle.
Return the nozzle screw to its
previous position.
Adjusting Spray
Turn the nozzle screw in to diffuse and
shorten the spray radius.
Flow Shut Off
Turn the center screw right to shut
off flow. Turn the screw left to open
flow.
Check Valve
To eliminate check valve
function, install the check
valve disk in position B.
© 2003 The Toro Company, Irrigation Division • An ISO 9000-certified Company • www.toro.com
102-1303
102-2633
Cleaning Screen
Remove and
flush screen
as needed.
To maintain left
stop, align riser
with body as
shown when
reassembling.
Form Number 373-0289 Rev. A