Mounting The Wall Mounting Bracket - SMA SUNNY HIGHPOWER PEAK1 Instrucciones De Instalación

SMA Solar Technology AG
5.3 Mounting the wall mounting
bracket
Figure 12: Safety clearances in mm
Figure 13: Dimensions of wall mounting bracket in mm
Installation Guide
INFORMATION
Use of the wall mounting bracket delivered with
the inverter is mandatory. Warranty claims will
expire if the inverter is operated without the
wall mounting bracket. It is strongly
recommended to use all six mounting holes.
Mounting of the wall mounting bracket:
• Observe ambient conditions and clearances (see
Section 5.2, page 21).
• Use screws and wall plugs that can safely carry
the weight of the inverter.
• Ensure that the wall mounting bracket is correctly
aligned.
• When installing one or several inverters, observe
the safety clearances to ensure sufcient ai rf ow.
• Mounting multiple inverters side by side in a
single row is recommended. Contact the supplier
for guidelines when mounting inverters in more
than one row.
• Ensure adequate clearance at the front, for safe
installation and service access to the inverter.
SHP75-10-STP60-10-IA-xx-19
5 Installation
23