Measurements; The Majolica Cladding (If Applicable); Non-Permitted Fuels; Shipping And Installation - Ravelli Alba Manual De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 114
Rev.1 19/09/2017
Page 44

Measurements

Height
Width
Depth
Empty weight

The Majolica cladding (if applicable)

The Majolica cladding is artisan-crafted and hand-finished.
For this reason there may be minor imperfections on the surface such as slight discoloration and hair cracks, which are considered
characteristics that make each Majolica a unique piece.
Since the Majolica cladding is made with a delicate material, we recommend handling it with care during cleaning
and avoiding sudden impact that may cause damage.
Characteristics of the fuel
Only burn natural, untreated wood with maximum 20% humidity.
Freshly cut wood can contain up to 60% water and is therefore not suitable for burning.
Wood is ideally dried for approximately 2 years. Wood that is too old is also unsuitable for burning.
The wood must be kept and dried in a well-ventilated place, and if it is outdoors it needs to be protected against the rain, if it is indoors
there needs to be good air circulation.
Store the wood already cut to size for use so that it can dry easily.
The wood can be kept in stacks, being careful to keep it raised off the ground, with a supporting surface that allows air to pass, such
as, for example, boards or pallets that help it dry and avoid the formation of rot and damp. For the same reason it is a good idea to
leave a few centimetres of space between stack and wall.
If unseasoned wood is used with a high percentage of humidity, this may create condensation in the smoke ducts, thereby altering
the draught and causing soot to deposit in the firebox, on the glass and in the chimney with the risk of it catching fire. Obviously the
stove will yield less.
In the wood stove you can use wood logs with a maximum length of 25 cm.

Non-permitted fuels

We recommend not using the following materials as fuel:
excessively humid wood
treated wood (painted, lacquered, glued wood etc.);
sawdust or chips
liquid fuel
coal or other fossil fuels
plastic and derivatives
treated paper and cardboard
waste
fuels that release toxic or polluting substances
Using these fuels, on top of being forbidden due to the emission of polluting and harmful substances, causes the stove to deteriorate
more rapidly and debris to accumulate in the stove and in the smoke evacuation system, thereby reducing performance and safety.
The gases produced by these fuels are dangerous for the environment and for your health!
Using fuel that is not compliant with the above will void the warranty.

SHIPPING AND INSTALLATION

Safety warnings for transportation and installation

! IMPORTANT
! IMPORTANT
Use and maintenance manual Alba- Alba steel- Lia- Lia steel
Alba
Alba
Lia
steel
1124
1124
952
519
519
519
440
440
440
140
115
135
The stove must be installed by a qualified technician, who must issue a declaration of
conformity of the system to the purchaser, taking full responsibility for stove installation
and correct operation.
The stove installation site must be chosen so that the generated heat can spread evenly
throughout the rooms that you wish to heat.
Lia
Unit of
steel
meas-
urement
952
mm
519
mm
440
mm
110
kg

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

LiaAlba steelLia steel

Tabla de contenido