Scaler Adjustments - Operation And Basic Adjustments; Scaler Adjustments - Multifunction Display (Optional); Scaler Tips - Olsen Logic Plus Guía De Operación

6.7.1 - Scaler Adjustments - Operation and Basic Adjustments

To activate
propulsion/activation pedal (6).
To adjust the vibration power: turn the control
knob (7) until the desired power is reached.
To toggle functions: push the control knob (7) in direction
of the table for "GP" function (General-Perio). Pull the knob gently in the
opposite direction of the table for "E" (Endo) function.
To adjust the water (including for multifunction display): use the control knob (8) on the instrument control
panel (section 5.4).

6.7.2 - Scaler Adjustments - Multifunction Display (Optional)

When removing the scaler from the holder or extending
the rod (Cross Flex), the multifunctional display (9) screen will
identify the scaler, the number of its position on the working
table (1 to 5), the selected function ("PG" or "E") and will display
the vibration power bar.
To adjust the vibration power: use the keys to
increase (11) or decrease (10) the power, which will be
indicated on the display (9).
To toggle functions: use the key (12) to toggle between
"PG" (General-Perio) and "E" (Endo) functions indicated in the
center of the multifunctional display (9).
It is not possible to switch the PG/E functions during the operation of the scaler (while
propulsion/activation pedal is activated).

6.7.3 - Scaler Tips

The tips GD1, PD1 and PD3 accompany the scaler. The power and application information for each tip is
available in the table below.
Note:
1 - Do not use the tip on features other than those specified by the manufacturer.
2 - Do not exceed the power limit for each tip. That could damage the tip and the scaler.
the scaler: push the
16