Prophylaxis System; Bicarbonate Jet (Optional); Prophy-Jet System (Optional) - Olsen Logic Plus Guía De Operación

Example:
Display value: 15
Selected gear ratio: 1:1
Rotation speed: 15 x 1000 = 15,000 rpm
To activate memory: press the desired Memory key (6). The display will show the speed and the LED (3) will
indicate the present transmission.
To record memory: select the transmission and adjust the speed of rotation to store. Press and hold one of
the Memory key (6) until the system emits 2 beeps, indicating that the memory has been recorded.
To save the second available memory repeat the same procedure.
To adjust the electrical micromotor water: use the water control knob (9) on the instruments control panel
(section 5.4).

- Prophylaxis System

6.9.1 - Bicarbonate Jet (Optional)

Before starting use of the bicarbonate jet,
its necessary deposit bicarbonate sodium in the
reservoir (4), check for moisture in the filter (8) and connect
the bicarbonate jet handpiece (3) to its coupling (2).
To fill the bicarbonate reservoir: open the reservoir (4) by
turning the cover (6) anticlockwise and deposit the bicarbonate
sodium until to the red line (5). Close the reservoir (4).
To remove condensed water in the filter: press the valve (7)
on the base of the filter (8) to drain the water.
To activate/deactivate the bicarbonate jet: press the
progressive/activation pedal (1). The more pressure on the pedal,
the greater the volume of the jet emitted by the handpiece, until
reaching the pressure limits of the equipment.
To adjust the spray: see section 6.1.
Clean the sodium bicarbonate tank (4) at the end of each procedure.

6.9.2 - Prophy-Jet System (Optional)

Before starting the Prophy-Jet system (3) use, deposit up to
15g of sodium bicarbonate for dental use in the sodium
bicarbonate reservoir (4) and attach the Prophy-Jet to the
pneumatic coupling available on the assistant module (section
5.6) or pneumatic coupling (2) for low-speed handpiece in the
working table.
To activate/deactivate: press the progressive/activation pedal (1). The higher the pressure applied to the
pedal, the higher the air volume of the jet emitted by the Prophy-Jet system, until reaching the pressure limits of
the equipment.
Clean the sodium bicarbonate tank (4) at the end of each procedure.
Factor: x1,000
19