Du Pont WFDW12000 Serie Instrucciones De Instalación página 4

STEP 1
Turn Off the Main Water Supply Line
1
Locate the cold water shut-off valve under the sink. Turn off the cold water supply to the existing kitchen sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. Allow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the cold water faucet on the kitchen sink to release pressure and allow water to completely drain from the line.
STEP 2
Install Bracket and Mount the System Head
NOTE: Mount the Filter System to a solid cabinet wall or wall. If a solid surface is not available, use hollow-wall anchor bolts or toggle bolts
(not included) to secure to the wall.
1
Position the Mounting Bracket
System Head. Screw the Mounting Bracket securely onto the System Head using the four Mounting Screws
2
Choose an easy-to-access area under the sink to mount the Filter System.
NOTE: To allow adequate space for filter cartridge changes, allow a minimum clearance of 4" to 6" below the Filter Housing. The Filter
System must be mounted in a vertical position.
3
Using the Mounting Bracket as a template, mark the holes for positioning the Mounting Bracket on the wall surface.
4
Using a 1/8" drill bit, drill four pilot holes in the wall surface for the Mounting Screws. Insert Mounting Screws through the
Mounting Bracket and into the wall surface. Tighten until secure.
Be sure that all electrical appliances and outlets are turned off at the
circuit breaker before working in cabinet area.
Universal Drinking Water Series
H A
on top of the System Head , aligning the four Mounting Bracket holes with the holes in the
W W A A R R N N I I N N G G
I
provided.
C C A A U U T T I I O O N N
Please wear safety glasses to protect
eyes when drilling.
3
1
2
1
2
4-6"
4
H
COLD WATER
VALVE
I
H
A
3
I
V4.0