Proper Installation; Before You Begin - Du Pont WFDW12000 Serie Instrucciones De Instalación

Proper Installation

Please read all instructions, specifications, and precautions before installing and using your water filter system.
N N O O T T I I C C E E
This filter must be protected Because of the product's limited service life and to prevent costly repairs or possible water damage, we strongly
from freezing, which can recommend that the housing be replaced every ten years. If the head of the filter has been in use for longer than
cause cracking of the filter this period, it should be replaced immediately. Date the top of any new head to indicate the next recommended
and water leakage. replacement date.
Precautions:
For cold water use only.
After prolonged periods of non-use (such as during a vacation), it is recommended that the system be flushed thoroughly. Let water run
for 10 minutes before using.
The filter cartridges used with this Filter System have a limited service life. Changes in taste, odor, and/or flow of the water being filtered
indicate that the cartridge should be replaced.

Before You Begin

I
Check under the sink to locate a solid wall surface to mount the Filter System.
NOTE: The Filter System must be mounted in a vertical position.
I
Determine if the Filter System will be used to filter water through the existing kitchen faucet or if an optional faucet for filtered water
will be installed.
I
Locate the cold water pipe under your sink and observe if it is a flexible hose or a rigid pipe (ex: plastic, metal, copper). Rigid pipes
may require cutting in order to make adequate space to install the fittings. Also determine if you have all appropriate fasteners and
adaptors to fit your plumbing.
I
Consult your local plumbing codes and install accordingly.
Universal Drinking Water Series
N N O O T T I I C C E E
2
KITCHEN FAUCET
HOT WATER COLD WATER
VALVE VALVE
RIGID TUBING INSTALLATION
KITCHEN FAUCET
HOT WATER COLD WATER
VALVE VALVE
FLEXIBLE TUBING INSTALLATION
V4.0