Publicidad
Idiomas disponibles
Idiomas disponibles
3. Installation on Emerson Fans Having a
Modular Switch Housing with Center Screw
3.6
Insert the Black and White Wires from the Light Fixture
Assembly through the Switch Housing Center Hole
(Figure 5).
Thread the Switch Housing onto the Light Fixture
Assembly (Figure 5).
NOTE: To prevent the wires from twisting, hold the
wires taut while installing the switch housing.
Tighten the Light Fixture Assembly until it fits securely
against the Switch Housing and the Fan Speed Control
Chain aligns with one of the Holes in the Light Fixture
Assembly Flange (Figure 5).
3.7
Insert the Black and White Wires through the
Lockwasher and Hex Nut (supplied) (Figure 6)
Firmly tighten the Hex Nut to secure the Light Fixture
Assembly to the Switch Housing using a wrench.
SWITCH
CUP
SWITCH CUP
CENTER HOLE
LIGHT FIXTURE
ASSEMBLY
Figure 5
INSTALL
LOCKWASHER
AND HEX NUT
SWITCH
CUP
LIGHT FIXTURE
ASSEMBLY
Figure 6
6
(continued)
LIGHT FIXTURE
ASSEMBLY
BLACK & WHITE
WIRES
LIGHT FIXTURE
ASSEMBLY
BLACK & WHITE
WIRES
LK150OM U.L. Model No.: PH334
LK180 ETL Model No.: LK180
Publicidad
