Publicidad
Idiomas disponibles
Idiomas disponibles
3. Installation on Emerson Fans Having a
Modular Switch Housing with Center Screw
3.10
The LK150OM Light Fixture Assembly Light Sockets
are equipped to accept Three 6.5-Watt Medium Base
A15 LED Bulbs (supplied) (Figure 9).
The LK180 Light Fixture Assembly Light Sockets are
equipped to accept Four 6.5-Watt Medium Base A15
LED Bulbs (supplied) (Figure 9).
3.11
Insert the Light Fixture Assembly Chain and the Fan
Speed Control Switch Chain through the Holes in the
Glass Bowl (Figure 10).
Gently place the Glass Bowl onto the Light Fixture
Assembly (Figure 10).
Secure the Glass Bowl by installing the Rubber Washer
and Thin Hex Nut finger tight on the Light Fixture
Assembly Threaded Shaft (Figure 10).
NOTE: It is advisable to periodically check the
tightness of the thin hex nut.
NOTE: It is critical that the fan chain(s) are aligned
with hole(s) in the shade and bowl cap for smooth
operation of the fan switch(es).
LIGHT FIXTURE
ASSEMBLY
SOCKETS
Figure 9
THREADED SHAFT
LED LIGHT FIXTURE
ASSEMBLY CHAIN
RUBBER WASHER
THIN HEX NUT
Figure 10
8
(continued)
LED MEDIUM
BASE BULBS
GLASS
BOWL
FAN SPEED
CONTROL CHAIN
LK150OM U.L. Model No.: PH334
LK180 ETL Model No.: LK180
Publicidad
