Adjusting The Height Of The Upper Basket - Fulgor Milano F6DWT24SS2 Manual De Usuario

ADJUSTING THE HEIGHT OF THE
UPPER BASKET
(Select Models)
The upper basket height adjustment
mechanism has been designed for
you to create large spaces in the lower
or upper sections of your machine
depending on your needs by adjusting
the height in the upper or lower
direction while your basket is empty or
loaded.
Thanks to this mechanism, you can
use your basket in three different
positions, namely lower, middle and
upper positions (1, 2, 3).
1. To raise your basket, hold the
upper basket wires with both hands
while the basket is in the lowermost
position and pull them up (A).
2. You will hear a "Click" from
the right and left mechanisms,
indicating that the basket has
reached the next level. Release the
basket.
Repeat the process if the height is not
sufficient.
1
2
3
To lower the basket, while it is in the
uppermost position;
1. Hold the upper basket wires with
both hands, slightly lift up the
basket and simultaneously push
and release the latches shown in
the figure (B).
1
2. Lower the basket from its current
position to the lower one.
2
3. Release the basket after it has
reached one level down.
3
Repeat the process if the height is not
sufficient.
C
The movement mechanism
may not function properly
if the upper basket is
overloaded or if the weight
distribution is not balanced.
In heavier conditions, there
is the risk of falling one level
down.
C
Make sure that the
adjustment mechanism has
the same positions on the
right and left sides of the
upper basket.
10
USA