Keys; Preparing The Machine; Program Selection - Fulgor Milano F6DWT24SS2 Manual De Usuario

6.1 KEYS

On/Off key
When you press On / Off key, indicator
lights illuminate on the display for ON
position. The lights turn off in OFF
position.
Program Selection / Program Cancel
key
Press this key until the desired
program appears in the program
indicator.
To cancel the running program open
the door of the product. Press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.
Function keys
If you press any of the Function keys
during program selection or time delay
selection, an affirmative key signal will
be heard provided that the relevant
function is supported by the selected
program. Function will be deemed
selected when the indicator of the
selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.
6.2 PREPARING THE
MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance
with the instructions in the user
manual.
3. Make sure that the upper and lower
Wash Arms rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.

6.3 PROGRAM SELECTION

1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.
3. Refer to the table of "Program
Table" to determine a washing
program suitable for your dishes.
4. Selected program will start
when you close the door of your
machine.
20
USA