Starting The Program - Fulgor Milano F6DWT24SS2 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Once you press the Time Delay
key, Display Information Line
will show "0:30" and Time Delay
indicator will start flashing.
3. Set the desired time by pressing
the Time Delay key. Time will
increase with increments of 30
minutes up to 6 hours and after
that in 1 hour increments up to 24
hours every time you press the key.
4. Close the door of your machine
after setting the Delayed Start.
Once the delay time is over,
the selected program will start
automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing program, auxiliary
functions or the duration of delay time.
C
Program and auxiliary
functions cannot be set/
changed after the program
has started.
To cancel the Time Delay function
Open the door of the product Press
and hold the Program Selection /
Program Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
C
You can select and start a
new program following the
cancellation of Time Delay
function.
C
Time Delay function cannot
be set after the program
starts.

6.6 STARTING THE PROGRAM

Close the door of your machine to
start it after selecting the program and
auxiliary functions.
C
Select Models:
Your machine performs
water softening depending
on the hardness level of
the supply water. Washing
time can change while
the program is running
depending on the ambient
temperature where your
machine is installed,
temperature of the supply
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when
it is running. There may
be a rush of vapour when
you open the door of your
machine; be careful.
C
The machine will be
switched off if no button is
pressed within 5 seconds
after opening the door while
the machine is running.
C
After the door has been
opened, if any button is
pressed within 5 seconds
and the door is closed, the
selected program resumes;
otherwise, the machine will
be switched off.
Open the door after the
machine has been switched
off, press On/Off button
and close the door within 5
seconds. The program will
resume washing.
24
USA

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

F6dwt24fi2

Tabla de contenido