Transportation And Storage - Vinten Ped Plus Pedestal Manual Del Usuario

English
Tracking motion
For tracking motion, engage all three track locks. The skid can now track backwards and
forwards in a straight line.
Steer motion
For steer motion:
Position the skid so that the fixed leg (with the red knob) is in the direction of travel.
Disengage the red track lock.
Engage the black track locks.
With the fixed leg of the skid facing forwards the skid can now be moved with a 'steering-
type' motion.

Transportation and storage

WARNING!
NOTE: It is not necessary to reduce the pedestal pressure prior to transportation or
storage. To avoid the possibility of dust or abrasive particles collecting on
moving components, set the column to minimum height.
The column and skid may be separated to facilitate transport or storage.
To separate the column and skid:
Lower the top stage (4) and engage the safety catch (3).
Lower the elevation tube (5) as far as possible.
Tighten the bottom clamp (18).
Remove the load.
Release the skid clamp (11) and the rubber securing straps (7). Lift the struts clear of
the foot supports.
Use the steering ring to lift the telescopic column vertically until it is clear of the skid
assembly, then secure the struts with the retaining strap.
WARNING!
Depress each leg locking plunger on the underside of the skid and fold the legs.
14
Local, national or international regulations may apply to the
transport and storage of pressurized pedestals.
The column will be unstable if stood on its base or on the
folded struts.