Jocel JFE011183 Manual De Instrucciones página 59

OPERATION
Before first use
In order to switch on the oven you need to:
Set required working conditions of the oven, its temperature and a mode of heating.
Set the knob to the required position, turning it right.
Switching on the oven is indicated by two signal lights, yellow and red, turning on. The yellow
light turned on means the oven is working. If the red light goes out, it means the oven has
reached the set temperature. If a recipe recommends placing dishes in a warmed-up oven, this
should be not done before the red light goes out for the first time. When baking, the red light will
temporarily come on and go out (to maintain the temperature inside the oven).The yellow signal
light may also turn on at the knob position of" oven chamber lighting".
To switch off the oven set the knob to the"0"knob position, turning it left. The signal light should
go out.
Conventional Oven
The oven can be warmed up using the bottom and top heaters, as well as the grill. Operation of
the oven is controlled by the oven function knob-to set a required function you should turn the
knob to the selected position.
As well as the temperature regulator knob -to set a required function you should turn the knob to
the selected position
The oven can be switched off by setting both of these knobs to the position "" / "0".
Caution!
When selecting any heating function (switching a heater on etc.) the over will only be
switched on after the temperature has been set by the temperature regulator knob.
-55-