Prior To Commissioning - diversey TASKI procarpet 45 Manual De Instrucciones

1 Handle bar
2 Steel guide bar
3 Suction nozzle
4 Triangular handle for unlocking the brush holder
5 Lid for brush housing and brush holder
6 Cylindrical brush
7 Centering hexagon for brush
8 Fresh water tank filter
9 Foot pedal in parking position (suction nozzle and
cylindrical brush lifted up)
10 Supporting roller
11 Foot pedal in working position (suction nozzle and
cylindrical brush lowered)
12 Additional drain hose for fresh water tank (hand tool
optional)
13 Plug-in coupling (additional drain hose and hand
tool)
14 Transport wheels
15 Drain hose fresh water tank (blue cover)
16 Suction hose recovery tank
17 Drain hose of recovery tank
18 Suction hose fresh water tank
19 Cable guide
20 Main cord
21 Function switch (I = encapsulation, 0 = brush only,
II = spray extraction)
22 Main switch (ON/OFF)
23 Explanation of function
24 Cord support
25 Recovery tank
26 Fresh water tank
27 Lid recovery tank
28 Suction filter
29 Float
30 Adjustment of brush height
31 Cable hook
32 Fresh water tank cover
33 Filling level indicator
34 Adjusting lever for steel guide bar inclination
35 Adjusting lever for free moving of the guide bar
36 Operating lever brush motor (ON/OFF)

Prior to commissioning

Mounting cylindrical brush
Before inserting, please ensure
• that the brush is not located below the red/yellow marking
and that bristles are not shorter than 1.4 cm.
Attention:
Do not use brushes that have reached
their wear limit. Use original TASKI brush-
es only.
Failure to observe these instructions may
result in inadequate cleaning results or
even floor damage.
3
4
1
2
67
EN