Mounting The G-Led Beacon; Mounting The Surface-Mount Ex D Beacon; Figure 2 Front View Of Ex D Beacon - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

Mounting the G-LED Beacon

ATTACH THE BEACON SECURELY: To prevent injury, this apparatus must
be securely attached to the mounting surface in accordance with the
installation instructions. Use installer-supplied fasteners suitable for the
mounting surface.
The mounting method and the installer-supplied mounting hardware depend on
which of the two G-LED models you are installing:

Mounting the Surface-Mount Ex d Beacon

Mount the beacon to a flat surface using the four 8.5 mm mounting holes.
Use installer-supplied fasteners suitable for the surface to which the device
will be mounted.
105.9 mm
(4.17 in)

Figure 2 Front view of Ex d beacon

105.9 mm (4.17 in)
Model G-LED Global Series LED Beacon
Installation and Maintenance Instructions
Ø105.9 mm (5.27 in)
4X COUNTER-BORED
HOLES TO FIT M8
SOCKET-HEAD
CAP SCREWS
9