Home Screen - Phcbi MCO-50AIC Instrucciones De Operación

HOME SCREEN

The display consists of two parts (right side and left side).
When the power is switched ON, the screen called "home screen" that shows the internal temperature,
CO density etc. is displayed.
2
①
<Left side of the display>
① Date display area
Displays the current date (see pages 70–71 for
setting instructions).
② Heating indicator
Highlighted when the heater is on.
③ Time display area
Displays the current time (see page 72 for setting
instructions).
④ Set temperature display area
Displays the value set for the temperature in the
chamber (see page 32 for setting instructions).
⑤ Current temperature display area
Displays the current temperature value in the
chamber. It blinks when the current temperature
value in the chamber exceeds the set
temperature alarm range.
⑥ CO gas injection indicator
2
Highlighted when CO gas is being injected into
2
the chamber.
28
④
② ③
⑥ ⑦
⑤
<Right side of the display>
⑦ Set CO density level display area
2
Displays the set CO
page 34 for setting instructions).
If the CO gas control is set to OFF, it displays
2
"OFF".
⑧ Current CO density display area
2
Displays the current CO
chamber. The value is not displayed if the CO
control setting is set to OFF.
It blinks if the CO
2
current CO density in the chamber deviates
2
from the CO control range.
2
⑧
density in the chamber (see
2
density value in the
2
control is set to ON and the
2