Setting Keypad Clicking Sound - Phcbi MCO-50AIC Instrucciones De Operación

OTHER PARAMETERS

Setting keypad clicking sound

The key operation sound can be set as follows.
 Setting values: ON or OFF
 Factory setting: ON
1. On the home screen, press the menu key (MENU/HOME).
▶ The left side of the display changes to the Menu screen.
2. On the Menu screen, move the cursor to Alarms & Controls [Fig. 1]
using the up/down keys (△▽), and press the enter key (ENTER).
▶ The display changes to the Alarms & Controls screen.
3. On the Alarms & Controls screen, move the cursor to Keypad Click
Set [Fig. 2] using the up/down keys (△▽), and press the enter key
(ENTER).
▶ The display changes to the Keypad Click Set screen.
4. With the cursor in the Keypad Click Set screen on Keypad Click Set
[Fig. 3], press the enter key (ENTER).
The right side of the display changes to the Keypad Click Set screen,
and the current setting value (ON) is displayed [Fig. 4].
5. Use the up/down keys (△▽) to change the key operation sound
setting value.
Each time the up/down key is pressed the value changes between ON
and OFF.
6. Press the enter key (ENTER).
▶ The input is confirmed and the display returns to the Keypad Click Set
screen.
7. Press the menu key (MENU/HOME) to display the home screen.
The display returns to the home screen automatically when 90
seconds has passed without any key operation.
Menu
Set Value
Data Log
Lock
Alarms & Controls
<Left side of the display>
Alarms & Controls
UV Setting
Gas Supply Setting
Date & Time
Keypad Click Set
DAQ Setting
Calibration
<Left side of the display>
Keypad Click Set
Keypad Click Set
<Left side of the display>
Keypad Click Set
ON
ON / OFF
<Right side of the display>
[Fig. 1]
▲
[Fig. 2]
[Fig. 3]
[Fig. 4]
73