Harbor Breeze 00723 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
7. Attach a blade (F) to a blade bracket (E) using
the blade screws (EE). Tighten each blade
screw (EE) securely. Repeat for the remaining
blades (F).
Hardware Used
Blade Screw x 15 + 1 extra
EE
8. Align the holes between the blade bracket
(E) and motor (B). Install the blade assembly
to the motor (B) using blade bracket screws
with washers (FF). Tighten each blade bracket
screw with washer (FF) securely. Repeat for the
remaining blade assemblies.
Hardware Used
Blade Bracket Screw
FF 10 + 1 extra
with Washer
9. Loosen two screws and remove one screw from
the switch housing plate (C).
7
EE
8
E
B
FF
E
FF
9
C
Screw
8
ASSEMBLY INSTRUCTIONS
10. Insert the wires from the motor (B) through the
middle hole in the switch housing (G). Attach
the switch housing (G) to the switch housing
plate (C). Align the keyslot holes and twist to
lock. Replace the screw previously removed
(Step 9, page 8) and tighten all three screws.
F
E
11. Remove the preassembled screws from the
switch housing (G).
B
12. Connect male plug from fan to female plug from
the light kit (H).
10
C
G
Screw
Keyslot
hole
11
G
Screw
G
12
Male plug
H
9
Female
plug