Home Mode; Sos; Mute Operation - Smanos X500 Manual Del Usuario

Home mode (Part arm)
In home mode, detectors setting to home zone are in disarm state; the other detectors
are still in arm state. That is, you can move freely in the home zone area; however, the
rest areas are still being protected.
Press the [Stay ] button, 3 seconds later, the control panel beeps once and the
mode LED is on.
Note: The PIR detector is set to home zone by default. That is, the PIR detector will not trigger an
alarm after you press the [Stay ] button.
The zones include home zone, normal zone, 24-hour zone and single zone. For details of each
zone, please refer to page 5.

SOS

In case of emergency, you can press the
Whenever you press the [SOS] button on the remote control, the system will alarm
immediately. The control panel will send SMS with the content "Emergency call" to user
and call the pre-stored phone numbers.
39
X500-UM-EN-IT-ES-PT-V1.0.indd 46-47
[SOS] button.

Mute operation

You can arm and disarm the system silently.
Press the [Stay ] button, the LED indicator on the remote control flashes once, and
then press [Arm ] button within 3 seconds. The alarm system will be armed without
making any noise.
Press the [Stay ] button, the LED indicator on the remote control flashes once, and
then press [Disarm ] button within 3 seconds. The alarm system will be disarmed
without making any noise.
Note: If wireless strobe sirens are used, they will not beep either.
EN
40
2016/12/9 9:27:55