Breville Die Cast 800ESXL Manual Del Usuario página 32

PROBLEM
No steam is generated
Milk is not foamy after frothing
POSSIBLE CAUSES
Machine is not turned on
Water tank is empty
Selector Control not in 'Steam' position
Steam Wand is blocked
Not enough steam
Milk is not fresh and cold
WHAT TO DO
Ensure the machine is plugged in, switched on at
the power outlet and the 'on/off' button is in the
'on' position.
Refer to step 1 – Filling the water tank on page 13.
Turn the selector control to the 'Steam' position.
Ensure the steam button is selected for steam and
'Hot Water' button selected for hot water.
Use the pin on the cleaning tool to clear the
opening. If the steam wand continues to be blocked,
remove the tip of the steam wand using the spanner
in the middle of the cleaning tool. Please refer to
'Care and cleaning' on page 25.
Steam wand may be blocked. Please refer to 'Care
and cleaning' on page 25.
Milk must be cold and fresh. Please refer to 'How
to froth milk for a cappuccino or latté' on page 17.
31
TROUBLE SHOOTING GUIDE