Yakima HoldUp Plus2 Manual De Instrucciones página 3

attach second traY to Base.
Align holes in base to holes in tray.
• Insert bolt, lock-
washer, and washer,
in order shown.
• Tighten with supplied
wrench.
wheel strap
fold holdup down.
• Pull spring Pin.
• Fold down holdup
• Spring pin should
snap into place.
Insert staBIlIzer pIn.
• ALWAYS USE
STABALIZEr PIn.
• Completely insert
pin into hole. Pin
will lock into place.
• Use pin when
holdUp Plus2 is in
down position, or up
position.
1033534A-3/18
Install staBIlIzer pIn.
• Thread plug through loop on lanyard.
• Firmly press plug into hole on base.
fold pIvot
arm down.
Be sure pivot arm
is folded down.
pivot arm
UPPEr TrAY:
IMPORTANT: Wheel
strap is to your left, and
pivot arm is to your right.