SFA Sanicondens Plus Instrucciones De Instalación página 7

OPTIONAL: if you connect the brown and black wires to
the control relays on your boiler, it will be switched off if the
water level rises too high in the unit.
ATTENTION: The maximum current admissible for our
detection system is 0.5A.
To protect the electrical components in the
SANICONDENS Plus, once the alarm has been triggered,
®
any water continuing to fill the tank comes out through the
overflow outlets in the cover.
7e
EXAMPLE OF AN INSTALLATION OF
A SANICONDENS Plus: see fig.
®
8
STANDARDS
SANICONDENS Plus conforms to the European directive
®
89/336/CEE on electrical safety.
INSTRUCTIONS INTENDED SOLELY FOR
QUALIFIED PROFESSIONALS
9
DISASSEMBLY
If a breakdown occurs, any service on the unit should be
carried out by a qualified engineer. In particular the
replacement of the power cable.
Disconnect the electrical supply before carrying out
work on the unit.
10721 140 SANICONDENS PLUS.indd 7
10
7e
11
SANICONDENS
parts and labour, subject to correct installation and use of
the unit.
TROUBLESHOOTING
INSTRUCTIONS RESERVED SOLELY FOR
QUALIFIED PROFESSIONALS
Disconnect the electrical supply before carrying out any work.
FAULT DETECTED PROBABLE CAUSES
GUARANTEE
® Plus SFA is guaranteed for 2 years for
ACTION NEEDED
®
®
23/10/12 14:17