123ignition 123/FIAT-2-R Instrucciones De Instalación página 6

GB
wiring
operating voltage : 4,0 to 15,0 Volts
max.range
temperature
coil
static setting
curves
tIps
- Do NOT disconnect ANY electric wire, when the engine is running. This is bad practice when using
high-tech electronic systems, such as the 123ignition.
- Keep moist and dirt away from the 123ignition.
- It has been reported, that the well known, red plastic, solid-core bougie-cords do not work properly in
combination with a 123ignition, whilst the engine DID run properly with points. This effect is explained
by the fact that these cables, when they are worn, cannot handle the higher tension, caused by the
123ignition.
- Carbon-core silicone bougie-cords are the better choice!
- Mistrust old coils : they all look O.K., but may have been overheated many times!
: red = +12V
: black = minus of coil
: 8000 rpm
: -30 to +100 degrees Celsius
: standard coil
: Top Dead Center ( TDC )
: 16 different ones for a variety of 2 cyl. FIAT - engines, selectable by the built-in
rotary-switch.