Brinkmann 810-6805-S Manual De Instalación página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cover Bolts
Brass Orifice
810-6805-S ROTISSERIE BURNER
CAUTION: Only use specified natural gas
orifice for your grill.
Note:
It is helpful to keep the screws
with the components as they are
removed for ease of reassembly.
Step 9
Remove the two screws of panel to gain
access to the rotisserie LP brass orifice on
back side of grill. Set aside for later use.
Step 10
Use the wrench included to remove the LP
brass orifice from the gas supply line.
Note:
Leave the back panel off until the
end of conversion and all gas
leak testing has been completed.
Note:
Follow directions in the leak
testing section of this manual
before using this grill.
Step 11
Re-install rotisserie cover using the bolts
that were set aside in Step 9.
8

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido