Safety; Danger Due To Mechanical Components; Danger Due To Electrical Components; Danger Due To Hydraulic Components - Nordcap Moretti Forni iR 260 - iLab Manual Instrucciones

4 - SAFETY

. Remove the plug from the electrical power supply during machine maintenance.
. Only qualified and well-instructed staff can carry out mechanical or electrical
operations.
. The machine must be used by one person at a time.
. Do not remove the guards when the machine is on.

4.1 DANGER DUE TO MECHANICAL COMPONENTS

. The safety guards protect all the parts. Keep them on during normal operations.
All the guards are controlled by a micro. An error will display when they are not
closed, therefore the machine will not work.
. There is a risk of injuring yourself during machine maintenance, particularly when
parts are removed without complying with safety standards.
. There is no danger if the machine is used correctly, as described in chapter 8.

4.2 DANGER DUE TO ELECTRICAL COMPONENTS

. Such danger is not covered because the components are not directly accessible.
Broken or damaged cables or electrical components must be promptly replaced by
specialist staff or an electrician.

4.3 DANGER DUE TO HYDRAULIC COMPONENTS

. Such danger is not contemplated because the components withstand at least five
times 40 bar pressure.

4.4 DANGER DUE TO LACK OF HYGIENE

. If the precautions in the MAINTENANCE chapter are not strictly complied with,
there may be serious hygiene-related danger.

4.5 DANGER DUE TO NOISE

. The average noise level measured near the work station is under 70 decibels.
UK/6