Grounding Instructions - IKEA Lagan Manual Del Usario

EN

GrOUNDING INSTrUCTIONS

WArNING
Avoid fire hazard or electrical shock. Fail-
ure to follow this warning may cause seri-
ous injury, fire, or death.
Avoid fire hazard or electrical shock. Do
not use an adapter plug, use an exten-
sion cord, or remove grounding prong
from the power cord. Failure to follow this
warning may cause serious injury, fire, or
death.
Proper Installation—Be sure your appliance
is properly installed and grounded by a
qualified technician. In the United States,
install in accordance with the National Fuel
Gas Code ANSI Z223.1/NPFA No. 54, latest
edition and National Electrical Code NFPA
No. 70 latest edition, and local electrical
code requirements. In Canada, install in ac-
cordance with CAN/CGA B149.1 and CAN/
CGA B149.2 and CSA Standard C22.1, Ca-
nadian Electrical code, Part 1-latest editions
and local electrical code requirements.
Install only per installation instructions
provided in the literature package for this
appliance.
For personal safety, this appliance must be
properly grounded. For maximum safety,
the power cord must be securely connected
to an electrical outlet or junction box that
is the correct voltage, is correctly polarized
and properly grounded, and protected by
a circuit breaker in accordance with local
codes.
It is the personal responsibility of the con-
sumer to have the appropriate outlet or
junction box with the correct, properly
grounded wall receptacle installed by a
qualified electrician. It is the responsibility
and obligation of the consumer to contact a
qualified installer to assure that the electri-
cal installation is adequate and is in confor-
mance with all local codes and ordinances.
IMpOrTANT SAFETy INFOrMATION
Grounding type
wall receptacle
This appliance is equipped with a 3-prong
grounding plug for your protection against
shock hazard and should be plugged di-
rectly into a properly grounded receptacle.
Do not cut or remove the grounding prong
from this plug.
For personal safety, the appliance must be
properly grounded. For maximum safety,
the power cord must be plugged into an
electrical outlet that is correctly polarized
and properly grounded.
If a 2-prong wall receptacle is the only
available outlet, it is the personal respon-
sibility of the consumer to have it replaced
with a properly grounded 3-prong wall re-
ceptacle, installed by a qualified technician.
See the installation instructions packaged
with this appliance for complete installation
and grounding instructions.
Conversion to (L.p.) Gas
This appliance allows for conversion to Liq-
uefied Petroleum (L.P.) Gas.
WArNING
Personal injury or death from electrical
shock may occur if the conversion to L.P.
gas is not made by a qualified installer
or electrician. Any additions, changes or
conversions required in order for this ap-
pliance to satisfactorily meet the applica-
tion needs must be made by a qualified
technician.
If L.P. conversion is needed, contact your lo-
cal L.P. Gas provider for assistance.
Do not cut, remove, or
bypass the grounding
plug under any
circumstances.
Power supply cord
with 3-prong
grounding plug
5