Troubleshooting - smartheart 01-541 Manual De Instrucciones

TROUBLESHOOTING

Problem
Display shows an
abnormal result.
Display is blank
when power is on.
No response when
POWER
is
pressed or when
new batteries have
been loaded.
Monitor keeps
re-inflating.
26 • ENGLISH
Possible Cause
Cuff position was not correct or
was not tight enough.
Body posture was not correct
during measurement.
Speaking, excessive movement,
angry, excited or nervous anxiety
during measurement.
Batteries may be expired or
installed improperly.
Incorrect operation; possible
strong electromagnetic
interference.
Circuit is locked.
Solution
Apply the cuff properly and attempt a new
measurement.
Review the 'Taking a Measurement'
portion of this manual and attempt a new
measurement.
Wait a period of time and attempt a new
measurement after calm has returned; do
not speak or move during measurement.
Check the polarity of the batteries and
reinstall if necessary; replace batteries with
new batteries.
Remove batteries and wait a minimum of
five minutes; reinstall batteries and attempt
a new measurement.
Remove and reinsert the batteries; attempt
new measurement.