Qwest 2.4GHz Multi-Handset Cordless Phone System Manual Del Usuario página 22

2.4GHz Multi-Handset Cordless Phone System
5. To delete a number from the Call Log, press
when the name/number is on the screen.
DEL
6. The "Call Log End" screen appears at the end of
the Call Log.
7. Press [ ] or OK to return the phone to the idle
state.
8. The "No Data" screen appears if you do not
subscribe to Caller ID or data was not received
before a call was answered.
Call Log Menu
1. Press while viewing a call log entry to
OK
display the Call Log menu.
2. If "Dial Number" is chosen and an external line is
available, the system calls the number. The
"Called Back" code (indicated by a C to the right
of the phone number) will display even if the
line is busy.
Note: If 10-digit dialing is required in your local area code and only the 7-digit
number shows, the call attempt may fail. See Setting Area Code in Chapter 6 of this
Owner's Manual.
3. If "Save to Directry" is chosen, the handset exits the Call Log and stores the
number using the name and number data from the Call Log entry. The user may
modify the call log entry before saving to the directory. If the directory memory
is full, an error tone sounds.
Note: The "Dial Number" and "Save to Directory" options do not appear if the entry
does not contain a phone number.
Page 22