Qwest 2.4GHz Multi-Handset Cordless Phone System Manual Del Usuario página 35

2.4GHz Multi-Handset Cordless Phone System
Can't Transfer a Call
Static, noise
Handset displays "---------"
Handset displays name
other than assigned name
•
Make sure transferring to an active intercom number.
•
Make sure handset you are transferring to is not in
Room Monitor mode.
•
Check connections.
•
Make sure you are within "range" of the base unit.
•
Look for possible interfering devices (e.g., microwave
ovens).
•
Move handset or base to a different location.
•
Press any key on the handset. Handset should start to
search for and find the base station.
•
If it recurs, cycle power on the base station.
•
Cycle power on handset by pressing the Pwr button
firmly until the screen goes blank, and then press it
firmly again.
Page 35