NSK Ti-max nano65LS Manual De Operación página 6

4. Insertion & Removal of the Bur
4-1 HP Bur
4-1-1 To Insert the Bur
1) Turn the Bur Lock Ring in the direction of the "
2) Insert the bur fully into the chuck then turn the Bur Lock Ring in the direction of the mark " " until it
clicks.
3) Test that the bur is secure by gently pulling and pushing the bur.
4-1-2 To Remove the Bur
Turn the Bur Lock Ring in the direction of the "
" mark until it clicks. (Fig.2)
" mark until it clicks then remove the bur.
Open
Close
Chuck Open Chuck Close
Fig. 2
5