MIYOTA NP20 Manual De Instrucciones página 6

4. You may "ADD" times together by starting and stopping the chronograph repeatedly.
5. After timing is completed, push button "B" to return the chronograph hands to the starting
position.
6. To return to normal time mode, push Mode button "C". The second hand will resume keep-
ing the previously set time.
D) READING THE CHRONOGRAPH
1. When you stop the Chronograph timing by pushing button "A", the Chronograph hands will
indicate the final reading in hours, minutes, seconds, 1/10 seconds, 1/100 seconds and
1/1000 seconds.
2. To read the final timing, use the last number located BEFORE the hand position of each
hand. The exceptions are the Chrono seconds and the 1/1000 seconds which will read at the
exact mark on it's respective dial.
SAMPLE OF THE CHRONOGRAPH READING:
Hand
Chrono hours
Chrono minutes
Chrono seconds
Chrono 1/10 seconds*
Chrono 1/100 seconds*
Chrono 1/1000 seconds** at "04" position
* The 1/10 and 1/100 chrono hands move for 30 seconds only at the beginning of the timing.
After 30 seconds they will stop and wait for the end of the timing. They will then indicate the
elapsed time.
Position
Between 4 and 5
Between 3 and 4
at 12
Between 6 and 7
Between 1 and 2
6
Reading
4 hours
3 minutes
12 seconds
6/10 of a second
1/100 seconds
4/1000 seconds