OBJ_BUCH-3012-003.book Page 15 Wednesday, September 6, 2017 3:04 PM
Before restarting, check the proper condition of the
vacuum hose. When doing this, leave the vacuum hose
mounted to the vacuum cleaner to prevent dust from
coming out. Otherwise, you could possibly inhale dust.
Do not clean the vacuum cleaner with a water jet point-
ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Do not leave the vacuum cleaner unattended while it is
switched on.
Do not use the vacuum cleaner as a permanent dust ex-
traction device.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Additional safety warnings
(AdvancedVac 20)
Use the socket only for the purposes
WARNING
specified in the operating instructions.
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Symbols and their meaning
Automatic Start/Stop feature
Extraction of dust resulting from run-
ning power tools
The vacuum cleaner automatically
switches on and off with a time delay
Switching Off
Vacuuming
Vacuuming of deposited dust
Specification of the allowable load of
max. 2000W
the connected power tool (country-
min. 100W
specific)
Product Description and Specifica-
tions
The vacuum cleaner is intended for vacuuming and extracting
materials that are not harmful to one's health and for vacuum-
ing non-flammable liquids.
Bosch Power Tools
The vacuum cleaner is intended only for private use and not
for professional use.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Container
2 Drain hole for liquids (AdvancedVac 20)
3 Hose connection piece (vacuuming function)
4 Socket for power tool (AdvancedVac 20)
5 Mode selector switch (AdvancedVac 20)
5 On/Off switch (UniversalVac 15)
6 Carrying handle
7 Vacuum lid
8 Latch of the vacuum cover
9 Castor
10 Castor brake
11 Vacuum-hose holder
12 Holder for crevice nozzle
13 Holder for floor nozzle
14 Holder for vacuum tubes
15 Bracket for curved nozzle/extraction adapter
16 Vacuum hose
17 Extraction adapter
18 Curved nozzle
19 Crevice nozzle
20 Vacuum tube
21 Floor nozzle
22 Brush insert* (AdvancedVac 20)
23 Rubber lip* (AdvancedVac 20)
24 Rubber lip/brush insert* (UniversalVac 15)
25 Hose connection piece (blower function)
26 Exhaust air cover
27 Snap-fastener
28 Connection flange
29 Dust bag*
30 Release buttons for rubber lip/brush insert
31 Air diffuser
32 Fabric filter
33 Filter
34 Filter holder
35 Filter basket
36 Permanent filter
37 Cable holder
38 Retaining strap
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
English | 15
1 609 92A 43W | (6.9.17)