After-Sales Service And Application Service - Bosch UniversalVac 15 Manual Original

OBJ_BUCH-3012-003.book Page 18 Wednesday, September 6, 2017 3:04 PM
18 | English
Cleaning/replacing filters (see figures F1–F4)
Replace any damaged filters immediately.
– Unlock the latches 8 and remove the vacuum lid 7.
– Remove the fabric filter 32 from the filter 33 and beat it
throroughly.
– Turn the filter holder 34 all the way in direction of rotation
" " and take the filter 33 out of the container 1.
– Brush down the flaps of the filter with a soft brush.
or
Replace a damaged filter.
– Put the filter 33 over the filter basket 35 and turn the filter
holder 34 all the way in direction of rotation "
Ensure that the opening of the filter 33 sits exactly on the
positioning cam on the filter basket 35. The filter holder 34
clicks into place.
– Put the fabric filter 32 over the filter 33.
Please ensure that the fabric filter 32 encloses the filter 33
completely and that the rubber insert sits in the groove be-
tween the filter and the housing.
– Reattach the vacuum lid 7 again and lock the latches 8.
Container
– Wipe out the container 1 from time to time with a commer-
cially available, non-scouring cleaning agent and allow to
dry.
Cleaning the permanent filter (see figure G)
Clean the permanent filter 36 from time to time in order to en-
sure that the vacuum cleaner continues to perform optimally.
– Open the exhaust air cover 26 and remove the permanent
filter 36.
– Rinse out the permanent filter 36 under running water and
then leave it to dry thoroughly.
– Re-insert the cleaned filter, ensuring that it is seated cor-
rectly and securely. Close the exhaust air cover again.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the vacuum lid 7 attached properly?
– Is the hose system clogged?
– Are the suction tubes 20 securely fixed together?
– Is the container 1 full?
– Is the dust bag 29 full?
– Are the filters clogged with dust?
The vacuum cleaner switches off on overheating. Proceed as
follows:
– Leave the vacuum cleaner to cool down for 60 min.
– Briefly remove the mains plug from the socket and then re-
insert it.
– Make sure that the container 1 and dust bag 29 are empty
and that the vacuum hose 16, filter 33 and permanent fil-
ter 36 are not blocked.
Emptying at regular intervals ensures optimum vacuuming
performance.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.
1 609 92A 43W | (6.9.17)
Storage (see figure H)
– Insert the vacuum tubes 20 into the holders 14.
– Put the vacuum hose 16 around the vacuum lid in the hold-
ers 11, place the end of the vacuum hose on one of the two
holders 11.
– Wind the mains cable around the cable holder 37.
– Fasten the retaining straps 38 to the cable storage 37.
– Insert the curved nozzle 18 or the extraction adapter 17 in-
to the holder 15.
– Insert the crevice nozzle 19 into the holder 12.
– Insert the floor nozzle 21 into the holder 13.
". – Carry the vacuum cleaner only by the carrying handle 6.
– Store the vacuum cleaner in a dry room and secure it
against unauthorised use.
– To lock the castors 9, actuate the castor brakes 10 by
pushing down.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Bosch Power Tools