PHOTO APPENDIX
FALL ARREST DEVICES COMPARABLE TO EASY MOVE
Resistance/drag when adjustment lever is moved: it should be able to move freely and immediately and automatically return to
its position. On the left: an Easy Move with the adjustment lever stuck in an incorrect position: this defect prevents the device
from working correctly.
Clean with compressed air, wash with soap and water and lubricate with silicon-based oil spray . If
the problem is not completely resolved, scrap the device.
Cam worn. See the difference between a cam in
good condition (on the left) and one that is extremely
worn (on the right).
Cable and sling missing: hole in device body is
present.
Fixed side plate bent and movement of locking cam
impeded.
Opening pin does not rotate freely.
Markings unreadable.
Attachment hole worn.
PRO22-2F713CTEN_rev.7 09-19