Lamp Test; Monitor Test - NAMCO PANIC PARK Manual Del Operador

6-3-3-4 Lamp Test

1. Select 'LAMP TEST' from the I/O Test Screen. The following screen
is displayed:-
DIP 4
BUTTON LAMP (L)
BUTTON LAMP (R)
EXIT
The start button lamp will illuminate each time the start switch is
pressed and the display will change from OFF to ON.

6-3-4 Monitor Test

1. Select "MONITOR TEST" on the menu screen to test and adjust the
Monitor. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button. To return to the Monitor Test Menu from a test pattern
press the Enter button.
3. Select "EXIT" and press the Enter button to return to the menu screen.
GRADATION PATTERN
CROSSHATCH PATTERN (CRT)
CROSSHATCH PATTERN (PROJ)
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW ANGLE ADJUST (PROJ)
FULL WHITE
EXIT
Note: Items (c) and (i) are not used on this game.
I/O TEST
12345678 [ON:RED]
ENTER SW : ENTER
MONITOR TEST
SELECT SW : CHOOSE
ENTER SW : ENTER
Page 47
OFF ....................................... (a)
OFF ....................................... (b)
..................................... (a)
..................................... (b)
..................................... (c)
..................................... (d)
..................................... (e)
..................................... (f)
..................................... (g)
..................................... (h)
..................................... (i)
..................................... (j)