Replacing The Steering Potentiometer - NAMCO WANGAN MIDNIGHT Manual Del Operador

8-10 Replacing the Steering Potentiometer

1. Remove the steering assembly.
2. Remove 2off hex socket head screws (M4x10) holding the potentiometer
mounting bracket to the front plate.
3. Slacken the grub screw (M4x10) and remove the potentiometer complete with
the mounting bracket.
Grub screw (M4x10)
4. Replace the potentiometer taking care to replace the correct colour wire to the
correct terminal.
5. Reassemble in reverse order.
Note: When refitting the potentiometer ensure that the grub screw engages on the
flat of the potentiometer shaft.
6. After replacing the potentiometer ensure that the game is re-initialized.
(see section 7 page 59)
(see 8-9 page 72)
Hex socket head screw (M4x10)
Page 73
Mounting bracket
Potentiometer