Replacing The Naomi Pcb Assy - NAMCO MAZAN Manual Del Operador

7-4

Replacing the NAOMI PCB Assy

1. Remove the Front Panel.
2. Remove the Control Base assy.
3. Disconnect the four connectors.
4. Remove the 4off pozi head screws (M5x12).
Pozi head screw (M5 x 12)
5. Remove the NAOMI PCB Assy.
6. Reassemble in reverse order.
(see 7-2 page 66)
(see 7-3 page 67)
Connectors
Control Base Assy
Control Base Assy
Page 68