Prodigy AutoCode Manual Del Propietário página 20

Prodigy
STEP 9: Select Unit of Measure
Press and release the "M" button until
the unit of measurement you are choosing
appears on the display. Press the "SET"
button and the memory segment will start
flashing. See Figures 13 and 14.
Your meter can display test results in
milligrams per deciliter (mg/dL) or
millimoles per liter (mmoL/L).
• The mg/dL unit is standard in the
United States.
• The mmol/L unit is standard in Canada.
STEP 10: Delete Memory
When the "dEL" symbol and the flashing
" " symbol appear on the display, you can
choose to clear the memory. If you do not
want to clear the memory, press the "SET"
button again to skip this step.
If you want to clear ALL memory, press the
"M" button for (4) four seconds and both
"dEL" and "
button again to delete ALL memory. The
"- - -" will appear to indicate all memory has
been deleted and the meter will turn off.
See Figure 15.
Set-up is now completed. Press the "SET"
button. "OFF" is displayed and the meter
turns off. See Figure 16.
Prodigy Diabetes Care, LLC
Talking Meter
" will flash. Press the "M"
18
Owner's Manual
Figure 13
Figure 14
Figure 15
Figure 16
www.prodigymeter.com