Viewing Results On A Personal Computer - Prodigy AutoCode Manual Del Propietário

Prodigy

Viewing Results on a Personal Computer

Caring for Your Prodigy
Test results in the memory can be transmitted to your
personal computer. Prodigy
Software and a standard USB cable are needed before
installation.
STEP 1: Install Software
Install Prodigy
®
your computer by following the instructions provided at www.
prodigymeter.com.
STEP 2: Connect to a Personal Computer
Connect the USB Cable to your computer.
Connect the USB Cable to the Data Port
of the meter. "Lnk" will appear if the USB
cable is connected to the meter.
See Figure 38.
You can begin to download the data from
the meter. "USb" will appear on the display
indicating that the meter is successfully
communicating to your computer.
See Figure 39.
Prodigy Diabetes Care, LLC
Talking Meter
AutoCode Meter
®
Diabetes Management System
®
Diabetes Management System Software on
www.prodigymeter.com
32
Owner's Manual
Figure 38
Figure 39