Performing A Control Solution Test; Talking Meter - Prodigy AutoCode Manual Del Propietário

Prodigy

Performing a Control Solution Test

Start with the meter off.
STEP 1: Insert Test Strip
Insert a test strip with the contact bar end
entering into the test slot first. Push the test
strip as far as it will go without bending it.
The meter turns on automatically.
See Figure 17.
STEP 2: Mark as a Control Solution Test
After the "
press the "M" button and a " " symbol
appears on display. With the control solution
bottle symbol on the display, the meter will
not store your test result in the memory.
If you decide not to perform a control
solution test, press the "M" button again
and the control solution bottle symbol will
disappear. See Figure 18.
Important: Be sure that you are in Control Solution Mode
so that the test result will not be stored in the meter
memory.
Prodigy Diabetes Care, LLC

Talking Meter

" symbol appears on display,
21
Owner's Manual
Figure 17
Figure 18
1.800.243.2636