Assembly - Truper SINA-10 Instructivo

Side extension arms
• The arms are useful to support work pieces exceeding
the cutting table area.
• To install onto the worktable loosen the extension arms
locks (23).
• Set the extension arms on both sides of the table.
Tighten the locks.
Press
• Use the press (19) to secure the work piece onto the
cutting table.
• Regarding the job set the press on any of the two orifices
(21) found in the cutting table edges.
• To secure fasten the press lock (20).
19
20
8
ENGLISH

Assembly

21
23
Dust collecting pouch
• Set the dust-collecting pouch (32) in the dust-collecting
chute (12) found in the back of the cutter head column.
12
32