Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Lower forward underbody panel – using a 10mm socket, remove (19) screws & flat washers holding the forward underbody panel to the rear underbody panel.
NOTE: There are (4) screws located in the wheel well area, horizontally, (2) per side. NOTE: DO NOT remove the (3) forward most screws from panel. Support the
panel as needed.
Forward underbody panel
Rear underbody panel
Rear
©2017 Cequent™ Performance Products, Inc. -
Sheet 4 of 24
76143NP
4-4-17
Rev. A
Printed in Mexico
Publicidad
Tabla de contenido
