Cequent Performance Products 76143 Instrucciones De Instalación página 5

2. Remove hitch access panel – Using a flat screw driver, remove (2) push 3a. Remove fascia – Using a T30 torx bit, remove (2) screws from the rear
underbody panel.
pin rivets and remove hitch access panel.
3c. Remove fascia – Using a flat screw driver, remove (2) push pin rivets
3b. Remove fascia - Using a 10mm socket, remove (2) flange nuts from the
from wheel well liner, both sides.
wheel well liner, both sides.
© 2017 Cequent™ Performance Products, Inc. - Sheet 5 of 24 76143NP 4-4-17 Rev. A
Printed in Mexico