Publicidad
Idiomas disponibles
Idiomas disponibles
3.0 OPERATION
3.1
SETTING UP AND TURN ON THE SCALE
Follow this set up when using the scale for first time:
1) Place the platform in the locating holes on the top cover.
2) Level the scale by adjusting the four feet. Ensure the bubble in the spirit level is in the
centre of the level and the scale is supported by all four feet.
3) Attach the power cable to the connector located on the base to the left of the scale.
4) Plug the power cable into the mains.
5) Press the power button located on scale keypad.
6) The scale will then display the software revision and run a self-test.
7) Once the self-test has been completed and a stable condition achieved, the scale will
display zero weight alongside stable and zero symbol indicators.
Mains connection
3.2
ZEROING THE DISPLAY
You can press the [Zero]/
is obtained, the display will show the indicator for zero.
The scale has a re-zeroing function to account for minor drifting or accumulation of material
on the platform. Press [Zero]/
shown when the platform is empty.
© Adam Equipment Company 2019
Battery compartment
key at any time to set the zero point. When the zero point
Esc
0
to re-zero the scale if small amounts of weight are still
Esc
0
7
USB
connectivity
port
Publicidad
Capítulos
