Parts Counting - Adam Cruiser CKT Serie Manual Del Usuario

3.5

PARTS COUNTING

The scale can be used to count parts based on the average weight of a previously weighed
sample by following these steps:
1) Zero the scale and tare the weighing container.
2) Press the [Func] key
3) The digits [1] and [6] can be used to scroll through the
different weighing applications, press until 'count' appears
on the display.
4) Press the [Tare] ↵ key to activate
5) Once activated, the 'PCS' label will appear on the top right-
hand side of the display.
6) Load the parts sample to be counted by pressing the
[SMPL] key, and by pressing the desired number on the
keypad e.g. 20.
7) Press [Tare] ↵ to confirm the number of parts.
8) The total number of parts will appear on the display, adding or removing parts will
adjust the parts count on the display accordingly by applying the average piece
weight to the weight of the parts to be counted.
9) During parts counting the display can be changed to show the net weight, unit weight
and number of parts by each time pressing the [UNIT] key.
10) To return to weighing, press [Func] and 'count' will be shown on the display.
NOTE: If the parts are too light to measure accurately, the count may become faulty. To ensure
accurate counting the unit weight of the item should normally be at least equal to the resolution
of the scale.
© Adam Equipment Company 2019 9