Accumulated Totals - Adam Cruiser CKT Serie Manual Del Usuario

Idiomas disponibles

1) Zero the scale and tare the container on the weighing pan once a stable weight is

displayed. If wanting to set weight manually, ensure there is nothing on top of the

weighing pan at this stage.

2) Press the [Func] key and scroll using digits [1] or [6] until 'percent' appears on the

display. Press the [Tare] ↵ key

3) Press the [SMPL] key. The display will now show the given weight as 100%. If no

items have been placed on the scale, pressing the [SMPL] key will change from

percentage to the pre-selected weight unit. Use the digits on the keypad to enter the

desired weight value and press the [Tare] ↵ key.

4) Removing or adding to the weighing pan will adjust the weight according to the original

weight value.

5) Press the [Func] key and scroll using digits [1] or [6] to select a different mode. Press

[Tare] ↵ to confirm.

NOTE:

The weight entered must be greater than 50 scale divisions.

The display may jump by large numbers unexpectedly if small weights are used to set

as 100% reference. For example, if only 23.5g is placed on a scale with 0.5g

increments and is set to 100%, the display will show 100.00%. However a small

change of weight will cause the display to jump to 102.13% as an increase of one scale

division (0.5g) to 24.0g will be equivalent to an increase of

2.13%.

3.8

ACCUMULATED TOTALS

The scale can be set to accumulate when a weight is added to the platform automatically or

manually by pressing [MR]. See menu structure section. The accumulation function is

available only during weighing. If at any time the weighing units are changed, the accumulated

data will be lost.

Manual Accumulation

When the scale is set to manual accumulation, the weight displayed will be stored in the

memory when the [Print] key is pressed and the weight is stable.

Accumulation display:

Tabla de Contenido