ESYLUX PD-C360i/24 DUODIMplus-FM Manual De Instrucciones página 20

Offset setting for light channel C2
Light value for channel C2 is 20 %, below C1.
GB
Offset setting for light channel C2
Light value for channel C2 is 10 %, below C1.
Offset setting for light channel C2
Light value for channel C2 is the same as C1.
Switch between fully automatic and semi-automatic mode
for light channel C1 + C2
For semi-automatic mode, the blue LED turns off for
approximately 2 seconds.
For fully automatic mode, the blue LED flashes 3 times.
Switch between fully automatic and semi-automatic mode
for HVAC channel C3
For semi-automatic mode, the blue LED turns off for
approximately 2 seconds.
For fully automatic mode, the blue LED flashes 3 times.
20
Corridor semi-automatic mode for light channel C1 + C2
Press the "C1" button, followed by "A / M"
(regardless of the original status).
The "200 Lux" button must then be pressed
within 2 seconds. The red LED will flash once.
Switch LEDs ON / OFF (red / green LED)
To switch LEDs off = press button, the blue LED will
turn off for approximately 2 seconds.
To switch LEDs on = press button, the blue LED will
flash 3 times.
Restore factory settings
Confirmed by brief alternate flashing of the
blue and red LEDs on the detector.